Engine and Auxiliaries including Cooling

New: Engine oil special deal, see Section 5.

Note: We usually have a range of re-conditioned radiators in stock and also re-con water pumps. Rads and pumps are available on an exchange basis - there is a surcharge re-fundable on return and may be additional postal cost. Unfortunately the quality of some of the old ones returned means that there has been a price increase. Please try to return good old ones!

All gaskets and hoses are available newly made. Newly made pistons, rings, bearings and valves are now available in certain sizes.

Note: Re-conditioned items carry a replacement warranty for six months from time of sale. If you are not happy with what you have received, please contact us immediately and a re-fund or replacement can be arranged.

       
Competition or Fast Road  
See also used items below    
900ccHead Ian Carter bv head, as new, w- solid carrier for R23 race cam 1 2000.00
photos avail - easily modified for 998    
900ccBlock 900cc bottom end - Ian Carter 2 800.00
BB1 998cc-1040cc head gasket ask 120.00 *
MM14 998cc-1040cc 74mm head gasket ask 90.00 *

valve comp EN214 ? various odd sizes, ask 11 15.00
CTS1016 valve comp inlet EN214 ? 1.4'', 1.465'', 1.5'' (set4) 8 60.00
CTS1017 valve seats for comp valves 1.4'' 3 5.00
CTS1080 valve comp exhaust EN214 ? 1.25'' (set4) 1 60.00
CTS1037 oil pump gear bronze 1 78.00
CTD1037A crank worm gear tuftrided to order 54.00
guide bronze (set 4) to order 41.00
20312 930 B1 type valve stem seal clip on (set4) 24 2.00

MM2

camshaft (R17, R20, R22, R23, GE3, M14, M15) ask 288.00 *
MM18 camshaft M18 race ask 336.00 *
MM9 steel follower buckets comp (set8) ask 126.00 *
CTS1075 9226013 timing chain competition (no link) 1 22.00 *
CTS1034 sprocket cam multi-hole to order 27.00 *
CTS1108 thermostat (74 or 77 degree) 5 7.00 *

JE race pistons 74.5mm 11/16'' [need to check] pin (set4) 2 350.00
18521KR 74mm (1040cc) piston Hepolite w- rings and 5/8'' pin 3 100.00
MM1 pistons, 72.5, 73, 74mm, 74.25mm, 75mm w- rings (set4) ask 288.00 *
RMS1 pistons, 72.5 or 74mm c/w rings (set4) ask 330.00 *
CTS1041 piston rings (set of 4x3) 998 72.5 std 1 75.00 *
RA20396 piston rings (set of 4x3) Apex 998 72.5 std 1 75.00 *
rings 72.5mm single, ask 13 5.00
rings 74mm single, ask 8 5.00

CTS1006

con rods lightened and polished with 3/8'' HT bolts (set4) 2 180.00
CTS1006 con rods lightened with 3/8'' bolts (set4) 1 140.00

outer water gasket 24 thou thick 2 8.00
CTS1076 block strengthening plate and bolt-stud set 2 140.00
long stud set only 2 24.00
b/e bolt ARP 5/16'' 8 6.00
b/e bolts, comp spec (set 8) to order 75.00 *
CTS1090 joint manifold competition type 5 7.00
CTS1005 crank shaft 1 200.00
IT1 large sump, front or RR rad to order ask
MB6+ main bearing bolts high tensile 12.9T (set6) 1 22.00
HB10+ head bolt set (5 long, 5 short) socket head 12.9HT on order 25.00 *
b/e bolt set8 1 55.00
MM15 head stud set w- special nuts ask 78.00 *
MM16 b/e bolt set ask 55.20 *
MM8 oil pump high capacity ask 222.00 *
RMS2 oil pump high capacity exchange ask 120.00 *
MM4A alloy deep pulley, small alternator ask approx 35 *
MM4B alloy deep pulley, large alternator ask approx 45 *
MM4C alloy deep pulley, w-pump ask approx 65 *
MM4D alloy deep pulley, crank ask approx 95 *
MD1 engine bush competition to order ask *
     

671 672

       
Head and Block  

7010128

cylinder head 875cc MkI with guides and seats 1 120.00
7010031 cylinder head 875cc MkI with guides and seats 1 120.00
7010171 cylinder head 875cc MkII with guides and seats 1 290.00
71717533 cylinder head L6 complete 1 400.00
71717533 cylinder head L6 bare with guides and seats 1 300.00
20252400 cylinder head 930cc bare with guides and seats 2 150.00
maybe suit turbo setup?    
900 900cc Imp bottom end (875cc +0.040) NOS 1 850.00
     

       
Valve Gear  

7050151

spring valve dual sport (set 8) 7 32.00
451.649 Terry's extra strong dual valve springs (set 8) 1 40.00
G50787 guide valve (set 4) IMProved 9 20.00 *
7054204 seat insert inlet MkII 35 5.00
seat insert exhaust MkII 4 5.00
seat insert inlet Sport 12 5.00
7100045 valve inlet MkI 41 4.00
7100046 valve exhaust MkI 11 4.00
7100047 cup valve spring exhaust or sport 25 1.00
7100049 spring valve std (set 8) 7 16.00
451.596 Terry's extra strong single valve springs (set 8) 10 36.00
7100050 collar spring rtg std 31 3.00
7100051 cotter-collet valve stem (set for 4 valves) 1 6.00
7101086 collar spring rtg later or sport 3 5.00
7100308 cup valve spring inlet std 7 1.00
7100465 valve inlet MkII 92 8.00
7100466 valve exhaust MkII and Sport 20 12.00
7100448 valve inlet Sport 32 15.00
9207019 circlip valve guide 120 15p
7100318 seal inlet valve stem std (set4) 8 1.00
cam follower std (each) 8 10.00
     

       
Cam and Timing Chain  

7054059

cam bearings std (set6) 3 36.00 *
7054059+ cam bearings +005 (set6) 1 36.00
7100058 lock tab cam sprocket 48 1.50 *
7100066 pin spring chain tensioner 3 75p
7100071 lock tab tensioner pivot 8 30p
9226013 timing chain 06B-1 std 4 20.00
7100078 pin 1/8'' x7/8'' oil pump-dizzy drive 24 30p
7100173 washer thick camshaft sprocket 23 50p
7100235 stud dowel 1/4 x1-1/2'' special cam brg cap 24 3.75 *
7100325 dowel 1/4'' x1/2'' cam carrier or manifold 48 25p
9146201 dowel 1/4'' x1'' flywheel-clutch 29 60p
dowel 5/16'' x3/4'' bell hsg 22 60p
dowel 3/8'' x1'' crank or timing cover 63 65p
7100411 camshaft 7010141 std 2 45.00
9040180 screw 3/8'' x3/4'' cam sprocket 110 50p
roll pin 0.255'' x1.0'' 8 25p
solid pin 0.195'' x1.5'' 4 25p
ring-dowel hollow timing cover locating 13 2.50
     

       
Pistons, Rings etc.  

7054041

gudgeon pin std each 4 16.00
7054041 gudgeon pin std (set 4, slight rust) 2 32.00
7054140 gudgeon pin Sport (set 4, slight rust) 2 32.00

7100107

piston w- rings Mk I (no eyebrow, single) 1 30.00

PEP16336, 18111, 18542

pistons Hepolite std w- rings+pin (set4) 5 350.00
EP16392 or RP10667 pistons BHB std w- rings+pin (set4) 2 350.00
pistons std (set4) w- rings no gudgeon pins 1 275.00
piston std van bare 3 20.00

PEP18111

pistons Hepolite +020'' w- rings+pin (set4) 1 375.00

GPC9218

pistons 930cc w- pin (set4) no rings 1 245.00
GPC9218 piston 930cc w- rings+pin (single) 2 60.00

RA18676

rings piston (set of 4x3) AE Hepolite 875 std 1 60.00
rings piston (set of 4x3) 875 std newly made 1 65.00
R934 rings piston (set of 4x3) Cords std 1 50.00

RA18676

rings piston AE Hepolite, Apex (set of 4x3) +020 2 60.00
R935 rings piston (set of 4x3) Cords +020'' 1 50.00
rings piston SIM (set of 4x3) +020 1 60.00

RA18676

piston rings AE Hepolite, Apex (set of 4x3) +030 3 60.00
R936 rings piston (set of 4x3) Cords +030'' 1 50.00
rings piston SIM (set of 4x3) +030 4 60.00

RA18676

rings piston AE Hepolite or Apex (set of 4x3) +040 2 60.00
R937 rings piston (set of 4x3) Cords +040'' 1 50.00
R1252 rings piston (set of 4x3) Deves +040'' 1 60.00

R938

rings piston (set of 4x3) Cords +060'' 1 50.00

rings piston (set of 4x3) Gandini 930 std 1 75.00

rings piston (set of 4x3) 998 std as above 75.00

assorted piston rings various sizes, ask 42 5.00
oil control rings 930cc 56 5.00
     

702

       
Crankshaft and Bearings  

7054045

b/e brg shell set Glacier-Dana std on order 45.00
7054045 b/e brg shell set AE Glacier std 1 48.00

7054045+

b/e brg shell set COVMO +010'' 2 55.00

7054046

b/e brg shell set AE Glacier +020'' 4 45.00

7054046+

b/e brg shell set AE Glacier +030'' 1 48.00

7054047

b/e brg shell set +040" Vandervell 5 45.00

7054050

main brg shell set Glacier-Dana std on order 50.00

7054050+

main brg shell set ACL +010" 4 65.00
7054050+ main brg shell set COVMO +010'' 1 50.00

7054051+

main brg shell set +030" 3 60.00

7054052

main brg shell set +040" 5 50.00

7054056

thrust brg Gacier (pair) +005" 5 12.00
S4593L small end bush 875cc (single) 3 7.50
7100017 H96/10R starter ring gear 9 48.00
tab-set engine full lock tab set 4 16.00
7100105 b/e brg cap lock tab (set of 8) 8 4.00 *
7100102 main brg lock tab (set of 3) 5 4.75 *
7100184 thick washer for crank pulley 8 60p
7100328 lock tab crank pulley 5 1.80
lock tab crank pulley early for dog 19 1.00
Woodruff key crank pulley 7 90p *
7100631 b/e brg cap (conrod) bolt NOS original (set of 8) 1 16.00
7100631 b/e brg cap (conrod) bolt 10.9HT (set of 8) 1 8.00
7100869 flywheel lock tab (pair) 17 3.50 *
9040135 flywheel bolt 10.9HT (set4) 3 3.50 *
? washer thick fire pump 33 30p
     

       
Miscellaneous  

7050132

GFE110 oil filter paper element 10 7.00 *
7080141 pressure plate filter canister w- washer+seal 4 2.00
7095018 worm gear crankshaft 6 25.00
dipstick 1 6.00
BS319 O-ring for filler cap 8 50p *
base oil filter unit std w- can 1 35.00
O-ring seal pressure relief valve, early 44 30p *
O-ring seal pressure relief valve, late 44 30p *
7100458 union SAE-JIC-8 oil drain to head 16 3.50
7100578-9 oil cooler hoses and unions 1/2 BSP (pair) 2 32.00 *
ask for other fittings or lengths   POA
filter head connection elbows (pair) 2 45.00
O-ring seal elbow to take off 44 30p *
9803179 blanking plug 1/8 BSPT oil way or manifold 21 1.00 *
7100593? oil drain pipe head to block flexy 5 20.00 *
7100593? oil drain pipe flexy for 930 block to order 30.00 *
9604173 stud 1/4 x2-1/8'' tappet block 4 1.50
9604203 stud 1/4 x2-1/2'' oil pump to block 48 1.50
9604203+ stud 1/4 x2-3/4'' oil pump to block 8 1.50
9605124 stud 5/16 x1-1/2'' manifold 28 2.20 *
5200481 stud 5/16 x1-5/8'' manifold longer or filter block 7 1.50 *
stud 5/16 x1-3/4'' 10 1.50
9605182 stud 5/16 x2-1/4'' timing cover and thermostat 10 1.50 *
9605182 stud 5/16 x2-1/4'' thermostat hsg stainless 10 4.00
9605223 stud 5/16 x2-3/4'' timing cover 10 1.50
9605343 stud 5/16 x4-1/4'' long manifold clamp stainless 10 4.50
or sport oil filter block    
9900413 stud 3/8 x2-1/8'' block to bell hsg 10 3.00*
9900421 stud 1/4 x1-1/2'' cam cover ? 58 1.50
1804556 oil filter spin on MkIII std 31 6.00
crush washer alloy 5/8'' x15/16'' 31 50p
crush washer alloy 3/4'' x1-1/16'' 13 50p
9003239 head bolt set (5 long, 5 short) EN16T original type on order 40.00 *
7100353 washer special hardened for HB (set 10) on order 6.00 *
7095021 oil pump and pickup filter 3 90.00
oil cooler 12 row 3/8 BSP 1 30.00
     

719

Note: most gaskets have now been re-manufactured and are similar to or better quality than the original. 998cc head gaskets also available.

       
Gaskets and Seals  

7050109

gasket set full top end VDD080/1 875-930cc IMProved 10 27.00 *
VEF021 gasket set full bottom end VEF021 w- hockey sticks 8 27.00 *
gasket set full bottom end no hockey sticks 5 19.00 *
7095000 gskt timing cover (pair) 61 2.00
7100061 gskt cam cover cork or card 51 5.00 *
7100062 joint oil filler to cam cover 4 90p
7100081 joint oil pump to block 88 1.00 *
7100136 gskt water pump 11 1.50 *
7100158 gskt hose to block inlet 51 35p
7100313 joint manifold std (metal) or sport (card) 113 5.00
7100336 joint oil filter fitting to block 54 1.40 *
7100357 seal dipstick 4 60p
7100367 head gasket std type incl O-ring 10 15.00 *
7100416 gskt thermostat hsg 11 90p
GPF8880 gskt thermostat hsg 930 type 150 50p
also fits Imp!    
7101259 seal crank rear ``hockey stick'' (pair) 1 8.50 *
7101336 gasket sump 38 7.00 *
9077102 Dowty seal 1/2 BSP bottom of oil drain or sump plug 38 1.00 *
Dowty seal 3/4'' top of oil drain 26 1.00 *
9101824 core plug (early) 1 1.50 *
core plug smaller 4 1.50 *
9107005 O-ring head gasket 84 15p *
9107026 O-ring timing cover 21 25p *
9107026+ O-ring timing cover Viton 30 60p
9107066/91 O-ring dizzy 19 35p *
9107066 O-ring breather MkI 13 30p *
9102085 oil seal crank pulley end 10 4.00 *
GPC9091 oil seal rear for 930cc B1 engine 3 8.00 *
BS843 O-ring 3'' for filter canister 31 1.00 *
BS204 O-ring 1/2'' for filter canister 48 40p *
     

729

       
Cooling System  
7100351 fan belt (1100, 1113, 1125, 1133 or 1150mm) 15 5.00 *
7100351+ cogged fan belt (ditto) 5 6.00 *
7101217 thermostat (82, 88 or 90 degree) 34 7.00 *
9214001 drain tap block or 3 way on order 10.00 *

7100445

hose 944 pump to block 12 11.00 *
7100643 union 3/8 BSPT hose tail to head 6 6.00 *
7100644/5 water union sport dual with banjo 1 10.00
7100644/5+ water union sport dual stainless with brass banjo 2 15.00
plug blanking 3/8 BSPT water union 2 2.50 *
plug blanking 1/2 BSPT 1 2.00 *
7100829 Woodruff key water pump pulley 18 80p *
7103229 hose 942 radiator top 13 14.00 *
7103230 hose 943 radiator bottom 9 11.00 *
7103552 hose 2382 pump to 3 way bypass 9 8.50 *
HH90 hose 90o elbow for heater valve silicone 5 7.50 *
HH2 heater hose J20 10m x5/8'' (sufficient for both sides) 2 36.00 *
7100433 bypass hose behind radiator 1m 3 4.00 *
5/8'' hose available to order per foot 4 1.30 *
3-way pipe junction no tap 1 10.00
Join1 hose joiner, 5/8'' x2'' aluminium 16 2.50
Jubilee hose clip BZP 22, 25, 30, 35, 40, 45, 50 and 55mm 28 1.50 *
also in stainless, approx 2x price, please ask    
JubSet Jubilee clips engine set 3 22.00 *
JubSSet stainless Jubilee clips engine set to order 40.00 *

1217377

drain tap radiator plastic w- seal 83 3.50
O-ring seal for above 4 30p *
7102492 radiator cap std 7lb short 15 6.50 *
7102990 radiator cap early 4lb short 2 4.00
radiator-header cap blank non-pressure 2 6.00 *
CTS1123 recon HE rad exchange 3 195.00 *
WR1MkI+ MkI radiator recon HE exchange to order 195.00 *
WR1van+ Van radiator recon HE exchange to order 195.00 *
exchange surcharge £30 refunded on return    
9000221 Acme screw and U-spire nut radiator fitting (set3) 2 6.00 *
7102265 clip wire rad shroud w- bolt 8 5.00
screw stainless for rad cowling to order *

WP1reman

water pump new re-manufactured to order ask *
WP1 water pump recon exchange 8 95.00 *
exchange surcharge £30 refunded on return    
WP1new930 water pump new 930 (outer only) 2 30.00
WPRK1 repair kit w-pump (brgs, seals and gasket) 4 25.00 *
9198018 6202 bearing w-pump 2 6.00 *
circlip pump brg 50 50p *
5046315 NB037 seal w-pump 6 7.00 *
impeller w-pump MkI 5-1/4'' 1 25.00
  bolt set w-pump (4x bolts, nuts washers) 5 4.50 *
bolt set pump bkts (4x bolts, nuts washers) 5 4.50 *
     

For grommets, see under Body.

741 742

       
Aluminium Castings and Related Misc.  

7010164

cam cover 1 20.00
EMB1 engine mounting bush, re-man 6 36.00 *
EMB1+ engine bush pushed into housing, re-man ask 45.00 *
sump 930 type 1 15.00
1010105 housing thermostat 10 24.00 *
9801043 plug sump 1/2 BSP 9 3.50
9801043 plug sump 1/2 BSP drilled for wire 4 3.50
plug sump brass 1 3.50
plug sump 1/2 BSP magnetic 1 10.00
plug 1/2 BSP tapped with short oil pipe 3 4.50
9077102 Dowty seals 1/2 BSP for sump plug IMProved see above 1.00 *
FORD1 oil filler cap plastic ``Ford'' type 2 6.00
CW11+ bkt full set for oil cooler 3 35.00
pipe retaining bkt to sump 20 5.00
9803112 blanking plug 1/4 BSP block RR early or FR late 12 2.00
9803115 blanking plug 1/4 BSP block RR late 3 2.00
9804420 blanking plug 1/4 BSP block FR early 3 2.00
9806422 blanking plug timing cover 1/4 BSPT 5 1.00
5220713 crush washer copper 1/4 BSP 11 50p
     

       
Good used Items  
18521KR 74mm pistons (3 single) 3 50.00
70mm pistons 11/16'' pin (set4) 1 150.00
72.5mm pistons 5/8'' pin (set4) 1 150.00
72.5mm pistons 11/16'' pin (set4) 1 160.00
998 piston single 8 35.00
pistons Hepolite +020'' w- rings+pin (set4) 1 200.00
PEP18111 piston Hepolite +030'' w- rings+pins nearly new (set4) 1 275.00
toothed belt competition 150L50 NOS 3 offer?
con rods lightened (set4) 1 120.00
Van radiator, very little use 1 120.00
Sport exhaust valve 10 5.00
Sport inl. valve little wear 4 10.00
7010157 Sport cam w- carrier and followers 1 70.00
crank re-ground +010 1 100.00
     

757

Rob Allan
2021-11-03